Raw material for Polyurethane Foam Insulation ,PU Spray foam insulation is used the polyurethane thermal insulation foam in construction.
introduction
BQ8301 is a water-blown system composed of polyols, silicone, catalysts, flame retardants, and other components. When it reacts with isocyanate, it produces rigid polyurethane foam, which is particularly suited for building insulation systems.
typical properties
|
Item |
Data |
Unit |
Standards |
|
Appearance Density@25℃ Viscosity@25℃ |
Pale yellow liquid 1.15±0.10 600±200 |
- g/cm3 mPa.s |
- ISO 2811 GB/T 12008.7-2010 |
processing data
The BQ8301 system for polyurethane foam insulation is best processed using a high-pressure machine.
Ensuring the equipment consistently delivers an accurate ratio of polyol to isocyanate is crucial for achieving high-quality foam.
|
BQ8301 |
100 |
|
Isocyanate |
100 |
|
Component temperature |
20℃ |
Cup test
|
Item |
Data |
Unit |
Standards |
|
Material temperature |
20 |
℃ |
|
|
Cream time |
2.5±0.5 |
sec. |
Internal test standards |
|
Gel time |
8.5±0.5 |
sec. |
|
|
Free rise cup density |
36.5±0.5 |
kg/m3 |
|
|
Remarks: stirring speed 1800rpm,diameter of stirring head 50mm, cup volume 500mL.Cup test |
|||
Physical properties
|
Item |
Value |
Unit |
Test method |
|
Core density |
≥45 |
kg/m3 |
GB/T 6343-2009 |
|
Compressive strength |
≥150 |
kPa |
GB/T 8813-2008 |
|
Thermal conductivity |
≤27 |
mW/m.K |
GB/T 10295-2008 |
|
Dimensional stability |
≤0.5 |
% |
GB/T 8811-2008 |
|
flame resistance |
B2 |
GB/T 8624-2012 |
Advantage
BQ8301 is a polyether polyol based product designed for spray foam insulation, producing polyurethane foam with low thermal conductivity. This effectively prevents heat transfer, significantly enhancing building insulation.
The polyurethane foam insulation system uses water-blowing technology, reducing the reliance on traditional blowing agents that are harmful to the environment. This also minimizes the emission of volatile organic compounds during production, making it more eco-friendly.
BQ8301 is designed for high-pressure spray equipment, ensuring better flow and uniform application during spraying. It consistently delivers an accurate polyol-to-isocyanate ratio, resulting in high-quality foam every time.
This blend polyol is particularly suited for building insulation systems, filling gaps, cracks, and spaces in walls, roofs, and other structures. It creates a durable seal that effectively blocks air and moisture infiltration.
BQ8301 contains flame-retardant components, enhancing the foam's fire resistance, providing added safety alongside its insulation benefits. This makes it suitable for applications requiring higher fire safety standards.
The foam generated by BQ8301 offers good dimensional stability and compressive strength, maintaining structural integrity over time and reducing maintenance costs.
With lower irritant risks, BQ8301 poses minimal health risks when handled with proper protective measures. A detailed Safety Data Sheet (SDS) is provided, allowing users to follow safety guidelines easily.
Handling precautions
1. BQ8301, a polyol-based product for spray foam insulation, contains a small percentage of tertiary aliphatic amines among other components.
2. Due to its alkaline nature, BQ8301 may cause mild to moderate irritation on direct contact with skin, eyes, and mucous membranes, especially with prolonged exposure.
3. Safety goggles and impermeable gloves should always be worn when handling this product if there is a risk of direct contact.
4. When applying spray foam insulation, any splashes that contact the eyes should be immediately flushed with plenty of water. If irritation persists, seek medical attention.
5. If the product splashes onto the skin, it should be wiped off immediately, and the affected area thoroughly washed with soap and water. A quality barrier cream can then be applied.
6. Contaminated clothing should be removed promptly to prevent further skin contact and should be thoroughly cleaned before reuse. The product should be kept away from food, beverages, and tobacco.
7. For additional safety information on blend polyether polyol for Polyurethane Foam Insulation, please refer to the Safety Data Sheet (SDS).
Our Beiqiao is the blend polyether polyol for polyurethane foam insulation,PPU insulation supplier,we supply the rigid polyether polyol for spray foam insulation,any needed,kindly contact us.
Hot Tags: Polyurethane Foam Insulation Raw material, China Polyurethane Foam Insulation Raw material manufacturers, suppliers, factory, flexible foam for sofa, Polyether polyurethane spray foams, Polyurethane Foams for hot water tanks insulation, blending with other polyols, Polyether polyol for elastomers, Polyether Polyol Used for Water Heaters




