PU foam insulation, or polyurethane foam insulation, is a widely used material in construction and building applications. It is valued for its versatility and exceptional thermal insulating properties, making it an ideal choice for energy efficiency.
Features and advantage
1, Energy Efficient. Blend Polyether Polyols for Spray Foam Insulation delivers the highest level of insulation against air and moisture. It is also the perfect thermal barrier. Of all types of roofing and wall insulation it has the highest R-value per inch (5.0-8.0 per inch).
2, Durability. One of the best features of Blend Polyether Polyols for Spray Foam Insulation is that it expands and contracts with the changing temperatures. This characteristic gives it unparalleled durability. Contractor's can install spray foam in almost any climate or harsh environment and it will hold up well.
3, A Seamless Surface. Once the Blend Polyether Polyols for Spray Foam Insulation lands on a surface it expands to cover the entire roof over a large area. This method provides a seamless membrane that fills in cracks, holes, corners, and along the base of the roof. Spray foam has no seams, so there is less chance for water to leak through. It is a solid barrier that protect your roof from moisture and air.
4. Environmentally Friendly. Blend Polyether Polyols for Spray Foam Insulation is an eco-friendly alternative to other roofing materials that harm the environment. It does not produce waste during installation
| Product Type | Blowing Agent | Ratio P:I | Cream Time/sec | Free Rise Density(kg/m³) | Thermal Conductivity(mW/m.k) | Application Field |
| General Spray System | HCFC-141b | 1:1-1.1 | 8-15 | 26-35 | ≤22 | Cold Storage/Exterior wall/Roof |
| B2 Flame Retardent Spary System | HCFC-141b/245fa | 1:1-1.1 | 8-15 | 26-32 | ≤22 | |
| B1 Flame Retardent Spary System | HCFC-141b/245fa | 1:1-1.1 | 8-15 | 26-32 | ≤22 | |
| Low density Spray System | H2O | 1:1-1.1 | 8-15 | 8-16 | --- | Car roof/ Wooden House |
How to properly apply sprayed polyurethane foam
In order to apply the sprayed polyurethane foam correctly, we should take a series of factors into account, ranging from atmospheric conditions to different types of of substrate and their temperature and water content.
Surfaces must be clean, dry and free of dust and grease to ensure the good adhesion of polyurethane foam to the substrate; if the substrate is metallic, the surfaces must also be free of rust. To ensure good adhesion on metallic substrates, it is recommended to use a suitable primer. The recommended minimum temperature of the substrate during spraying is 5ºC.
The coating thickness is perfectly controllable and can be modified by altering the application speed and/or mixing chamber of the gun. It should be noted that the lower the number of layers applied to achieve a certain thickness, will achieve a higher density foam, achieving better thermal properties. When applying a very large thickness, the applicator must apply in thinner layers rather than one thick layer, and must allow time for the spray foam applied to cool between adding each layer to prevent high exothermic reactions, which would influence the quality of the foam. The information on maximum thickness per layer is in the TDS (Technical Data Sheet) for that product



Hot Tags: Blend Polyether Polyols for Spray Foam Insulation, China Blend Polyether Polyols for Spray Foam Insulation manufacturers, suppliers, factory, pu roller for wide digital printing machine, PU Foam For Sofa, polyether polyol foam for refrigerator, Blend Polyether Polyol for Mine, Polyurethane thermal insulation board, Blend Polyol Used for Portable Incubator



