Polyether Polyol Used for Water Heaters

Good flowability and uniform density distribution
Excellent dimensional stability, high compressive strength, and low thermal conductivity
Strong adhesion to commonly used materials in water tanks.

Send Inquiry

The Polyether polyol used for water heaters, have below advantage:

Good flowability and uniform density distribution

Excellent dimensional stability, high compressive strength, and low thermal conductivity

Strong adhesion to commonly used materials in water tanks.

product-720-900

Main items

To BQ8013 Polyether Polyol Used for Water Heaters the ozone depletion value is 0, environmental, non-toxic side effect, has good fluidity and adhesion, foaming pressure is low, the foam density is uniform.

To BQ8016 Polyether Polyol Used for Water Heaters,using self-developed special polyether, good flowability, low foaming pressure and good demould property. The foam shows an uniform density distributions, short demould time and good dimension stability in high/low temperature.

To BQ 8014, Polyether Polyol Used for Water Heaters with good solubilit and an uniform density distribution & smooth surface with skin and good cohesiveness with the inner liner and outer skin.

To BQ8015, Polyether Polyol Used for Water Heaters no ozone consumption value, the foam surface is fine,low thermal conductivity , better flow ability and well size stability.

Properties

Item No.	BQ8013	BQ8014	BQ8015
Product type	Water heater	Pentane water heater	HFC water heater
Types of blowing agent	H₂O	CH	HFC-245fa/HFC-365mfc
POL:ISO	100:130-150	100:110-125	100:110-125
Appearance	Pale yellow transparent liquid	Pale yellow transparent liquid	Pale yellow transparent liquid
Temperature/°C	20-25	20-25	18-22
Gream time/S	10-20	10-20	10-20
Gel time/s	45-90	45-90	45-90
Free foam density/Kg/m	30-34	25-32	25-32
Molding foam density/Kg/m	≥42	≥36	≥34
Thermal Conductivty /W/m.k	≤0.026	≤0.022	≤0.020