Polyether Polyols Used for Mining Industry

Polyether polyols used for mining industry can be used for mine plugging or mine seal. The blend Polyether polyol for mine has adjustable foaming time, large foaming multiple, no solvent, small smell and flame retardant, which is suitable for sealing gas drainage hole and air leakage. The polyether polyols for mine is superior abrasion and ground-level ozone resistance.
Send Inquiry
Description

Polyether polyols used for Mining Industry are proven to retain performance and durability, making them suitable for the harshest conditions,it's PU foam for mining.

 

The minging polyols for polyurethane foam has superior ability to handle harsh environments makes them a cost-effective alternative to conventional rubber and neoprene pads.

 

Application 

 

BQ8036 is a kind of blend polyether polyosl used for mining Industry.

Polyurethane's durability and cost-effectiveness have made it a favoured alternative to rubber-based compounds in mining industrial.

 

Before the grouting reinforcement to prevent the coal wall piece of help, reinforcement, temporary reinforcement, etc. Of the tunnel, subway, and other engineering of broken and loose rock mass for reinforcement.

 

Grouting & Tunneling can only be done via high pressure machine injection process.

 

 

About Grouting

 

There are two types of grouting, namely hydrophobic and hydrophilic.

 

Hydrophobic grouting refers to the system wherein polyurethane mix foams up quickly, irrespective of any water contact in the cracks, to block all the unwated water seeping in. This type of grouting can have both fast and slow reaction profiles, depending upon the customer requirements. Hydrophilic grouting refers to the system wherein polyurethane mix does not foam up until there is any water or moisture contact in the cracks, thus ensuring to block the source of water leakeages. This is also called a moisture cure system for grouting purposes.

 

The highest reaction temperature is below 100℃ and the compressive strength is over 40MPa of BQ8036 polyether polyol used for mining industry .

 

Properties to the mining foam solution

 

Item No.

Material ratio (Volume ratio)A:B

Raw matrial properties

Reaction performance indicators

component

Appearance

Viscosity at 25℃(mPa.s)

Compressive strength

The highest reaction temperature

Expansion times

Flame retardant

BQ8036 Inorganic reinforcement

1:1.0

A

Colorless transparent liquid

200-400

≥40MPa

<100℃

1

Difficult to burnt

B

Dark brown liquid

100-300

BQ8037 Organic reinforcement,Organic water blocking

1:1.0

A

Colorless to light yellow transparent liquid

200-1200

≥40MPa

<100℃<140℃(water blocking)

1

Flame retardant

B

Dark brown liquid

100-500

BQ8038 Organic low temperature reinforcement

1:1.0

A

Colorless to light yellow transparent liquid

200-350

≥1.0MPa

<95℃

2-4

Flame retardant

B

Dark brown liquid

150-400

BQ8039 Organic road and tunnel reinforcement

1:1.0

A

Colorless to light yellow transparent liquid

200-1200

-

<140℃

1-15

Flame retardant

B

Dark brown liquid

100-500

BQ8040 Organic filling

1:1.0

A

Colorless to light yellow transparent liquid

200-350

-

<95℃

15-30

Flame retardant

B

Dark brown liquid

100-250

BQ8041 Organic spray

1:1.0

A

Colorless to light yellow transparent liquid

200-350

-

<95℃

20-25

Flame retardant

B

Dark brown liquid

100-250

BQ8042 Organic sealing

1:1.0

A

Colorless to light yellow transparent liquid

200-1200

≥0.2MPa

<140℃

≤20

Flame retardant

B

Dark brown liquid

100-250

Packing

 

Feature

 

Item No.

Product features

BQ8036 Inorganic reinforcement

Grouting reinforcement of coal wall prevents slabs, before the grouting reinforcement, temporary reinforcement.The inorganic reinforcing material has been certified by the safety standard. The highest reaction temperature is below 100'C and the compressive strength is over 40 MPa.

BQ8037 Organic reinforcement.Organic water blocking

Grouting reinforcement of coal wall prevents slabs,pre-grouting reinforcement for fault fracture zone, small coal pillar reintorcement, before the grouting reinforcement, temporary reinforcement.The organic water shutoff material passed the safety certification, the highest reaction temperature was below 140℃,the compressive strength was more than 50 MPa.and the organic reinforcement material passed the safety certificaton, the highest reaction temperature was below 100℃,the compressive strength was more than 40 MPa.

BQ8038 Organic low temperature reinforcement

Before the grouting reinforcement, temporary reinforcement. The internal reaction heat is lower than 95℃and the strength is more than 1.0MPa.

BQ8039 organic road and tunnel einleseemen

Of the tunnel, subway, tunnel, other engineering of broken and loose rock mass for reinforced by filling, lt can be adjusted according to the application environment, and the foaming rate can reach to 1-15 times.

BQ8040 Organic filling

Fill holes in broken coal seams or rock formations, pores in tunnels, etc. Seal the coal seam goaf and abandoned roadways to

prevent air leakage, flling of working faces or tunnel holes, and prevent gas accumulation. The interal reaction heat is lower

than 95℃.Fast foaming, high foaming rate, and high filling efficiency.

BQ8041 Organic spray

Drivage roadway, the use of the coal mine in advance because the gas there will be a large or irregular penetration, rapid roadway surface spraying, sealing gas, eliminate hidden danger, ect.Coal pillar surface spraying, prevent the mining area coal seam spontaneous combustion due to air leakage and harmful gas leaking. The interal reaction heat is lower than 95℃.The product has a certain strenath and toughness, which can resist a certain degree of deformation

BQ8042 Organic sealing

Used for sealing gas drainage hole, sealing air leakage, etc.The invention has the advantages of adjustable foaming time, no solvent, small smell, flame retardant, etc.The application process is not limited by the drilling angle, easy to use.

 

Storage
 

During the storage and transportation the polyether polyol used for mining industry:

Need pay attention to ventilation, coolness, and dryness, avoid sunlight and rain.

keep away from water and heat source.

 

With our proficient after-sales service team, we diligently handle and resolve your orders, guaranteeing a seamless and hassle-free experience.

 

BEIQIAO polyurethane polyether polyol is 24/7 online service for you.

product-800-800
product-800-800
product-800-800

Contact now

 

We supply polyurethane blend polyol for spray foam,refrigerator,sandwich panel, cold storage , pipe insulation and for mining industry.

 

We know you have good and stable supplier now,however,still hope can get a chance to send offer for your reference,maybe our polyol will help you save more cost and make you win more market.

Hot Tags: polyether polyols used for mining industry, China polyether polyols used for mining industry manufacturers, suppliers, factory, polyurethane for wheels, Polystyrene Foam, insulation used PU foam, rigid foam insulation for water heaters, Polyether Type TDI Prepolymer, Hard Foam polyether polyols for solar water heater