Polyether Polyols for Elastomer

Elastomer polyether polyol is prepared by polyaddition reaction of initiator (compound containing active hydrogen group) with ethylene oxide (EO), propylene oxide (PO), etc. in the presence of catalyst. Its main chain contains ether bond (—R—O—R—), and the end group or side group contains more than 2 hydroxyl groups (—OH)‌23. Polyether Polyols for Elastomer is a polymer material obtained by the reaction of polyester polyol and polyisocyanate under certain conditions, also known as elastomeric polyurethane‌. It has excellent physical properties, heat resistance, weather resistance, wear resistance and environmental protection characteristics, so it has been widely used in many fields. BQ8115 is a polyether polyol used for polyurethane Elastomer,including rod,sheet and board and so on.
Send Inquiry
Description

Polyether Polyols for Elastomer is one of the most important raw material of polyurethane elastomer with tough, crack-resistant, and abrasion-resistant, which lasts significantly longer than conventional rubbers and plastics.

 

This kind of Polyether Polyols for Elastomer is designed and developed according to the personalized demand of customer application, and widely used in polyurethane elastomers, adhesives, photo-cuarable resin, leather slurry, foam glue etc. These products have special properties and can be used to solve some of the bottlenecks which present when conventional polyether polyols are used.

 
properties

 

1. Excellent physical properties: Elastomer polyether polyol has excellent physical properties, with high hardness, elastic modulus, tensile strength and tear strength.

2. Good heat resistance: Polyether Polyols for Elastomer  has good high temperature resistance and will not age due to high temperature.

3. Environmental protection characteristics: Elastomer polyether polyol has environmental protection characteristics. Compared with other materials, it produces very little harmful gas during its production process and will not pollute the environment.

 

Application

 

Application fields:
In addition to being used in the manufacture of PU rod,sheet and board, elastomeric polyether polyols can also be used for:
‌Automobile manufacturing‌: used in the production of interior products such as car seats, steering wheels, and guard plates, with good physical properties and durability, and in line with the environmental protection requirements of the automotive industry‌.
‌Sports goods‌: used in the manufacture of sports shoes, protective equipment, etc., because of its strong softness and good pressure resistance, it provides better protection and comfort‌.
‌Furniture manufacturing‌: used in the production of mattresses, sofa seats and other products, with durability and comfort‌.
‌Medical supplies‌: used in the manufacture of medical prostheses and orthotics, simulating the softness and elasticity of human muscles and improving rehabilitation effects‌.

Elastomeric polyether polyols are increasingly widely used in various fields. In the future, it will continue to develop in the direction of environmental protection, high technology, and high added value, and develop more creative products. Production technology will also be more advanced, and production efficiency will be further improved, promoting the continuous development of the elastomeric polyether industry‌.

 

Advantages of Polyurethane When Compared to Conventional Materials:

 

Polyurethane vs. Rubber

Polyurethane vs. Metal

Polyurethane vs. Plastic

High abrasion resistance

Lightweight

High impact resistance

High cut & tear resistance

Noise reduction

Elastic memory

Superior load bearing

Abrasion resistance

Abrasion resistance

Thick section molding

Less expensive fabrication

Noise reduction

Colorability

Corrosion resistance

Variable coefficient of friction

Oil resistance

Resilience

Resilience

Ozone resistance

Impact resistance

Thick section molding

Radiation resistance

Flexibility

Lower cost tooling

Broader hardness range

Easily moldable

Low-temperature resistance

Castable nature

Non-conductive

Cold flow resistance

Low-pressure tooling

Non-sparking

Radiation resistance

 

Properties

 

Item

Colour(APHA)

OHV(mgKOH/g)

Viscosity(mPa.s/25ºC)

H2O content(%)

Acid Value(mgKOH/g)

PH

K+(mg/Kg)

Degree of unsaturation(mol/Kg)

Application

BQ8100

≤50

265-295

60-80

≤0.05

≤0.05

5.0-7.0

≤5

-

Can be used for elastomer chain extender, foam glue, polyurethane grouting material, coating etc.

BQ8114

≤50

54.0-58.0

400-700

≤0.02

≤0.05

5.0-7.0

-

≤0.01

Can be used for polyurethane elastomer, waterproof coating, paving materials etc.

BQ8115

≤50

26.0-29.0

1300-2200

≤0.02

≤0.05

5.0-7.0

-

≤0.01

Used for polyurethane elastomers, adhesives, sealants etc.

BQ8116

≤50

18.1-19.3

2200-3200

≤0.02

≤0.05

5.0-7.0

-

≤0.01

Used for polyurethane elastomers, adhesives, sealants etc.

 

Handling

 

Avoid contact with skin and eyes.

Avoid inhalation of vapour or mist.

No smoking.

Take measures to prevent the build up of electrostatic charge.

 

product-500-500
product-500-500
product-500-500
product-500-500
product-500-500
product-500-500

 

Hot Tags: polyether polyols for elastomer, China polyether polyols for elastomer manufacturers, suppliers, factory, Polyether polyols for Reactive Adhesives, Polyurethane Foam for sandwich panel, EG BG AA Based Elastomer Polyester Polymer Polyol, PU flexible foam, Polyurethane Waterproof Coating, Pipe Insulation Polyurethane Systems