Polyester Prepolymer for Polyurethane Parts is a polyester type prepolymer, commonly used as a base material in the production of polyurethane elastomers. It is synthesized through the reaction of polyester diols with diisocyanates, resulting in a prepolymer that contains active isocyanate groups and flexible polyester chains.
These prepolymers are known for their excellent flexibility, abrasion resistance, and chemical resistance. By adjusting the types and ratios of polyester diols and isocyanates, a wide range of physical and mechanical properties-such as hardness, tensile strength, and elongation-can be tailored to meet specific application requirements.
Advantage of Polyester Prepolymer for Polyurethane Parts
Strong wear resistance for long-lasting performance
Good resistance to oils and industrial chemicals
Excellent mechanical properties with adjustable hardness and strength
Flexible formulation to suit different processing and end-use needs
This material is widely used in casting and molding processes for manufacturing high-performance polyurethane parts in industries such as automotive, machinery, mining, and material handling.
| Property | Unit | BQPS25 | BQPS30 | BQPS32 | BQPS36 | BQPS38 |
| NOC | % | 2.5±0.2 | 3±0.2 | 3.2±0.2 | 3.6±0.2 | 3.8±0.2 |
| Appreance | WHITE SOLID | |||||
| 100g prepolymer MOCA dosage/g | g | 7.4 | 8.9 | 9.5 | 10.6 | 11.2 |
| Vosity | mPa.s | 2300 | 1800 | 1600 | 1400 | 2000 |
| Prepolymer /MOCA Mixing temperature | ºC | 85/115 | 80/115 | 80/115 | 80/115 | 80/115 |
| Gel time | min | 17-25 | 15-20 | 13-18 | 11-16 | 6.5 |
| Post-vulcanization temperature | ºC | 100 | 100 | 100 | 100 | 100 |
| Post-vulcanization time | h | 16 | 16 | 16 | 16 | 16 |
| Hardness | Shore A | 75 | 80 | 83 | 85 | 85 |
| Density | g/cm³ | 1.24 | 1.24 | 1.24 | 1.24 | 1.24 |
| 100% Modulus | MPa | 3 | 4 | 3 | 5 | 4 |
| 300% Modulus | MPa | 6 | 9 | 7 | 11 | 9 |
| Elongation at break | % | 650 | 580 | 550 | 550 | 530 |
| Right angle tear strength | N/m | 60 | 75 | 78 | 85 | 80 |
| Rebound rate | % | 40 | 35 | 35 | 33 | 33 |
| DIN Abrasion Resistance | mm³ | 35 | 41 | 36 | 40 | 42 |
Polyester TDI type prepolymer Application
Polyester TDI type prepolymer can be used for manufacturing polyurethane elastomer components such as rubber rollers, rods, wheels, seal rings, screen plates, molds, piston bushings, and scrapers.
Polyester TDI polyurethane prepolymer Properties
Polyester TDI polyurethane prepolymer made products exhibit excellent wear resistance, oil resistance, superior mechanical performance, tear resistance, and tensile strength. They can be colored by adding pigments to adjust the color.
Operating Instructions to the TDI Polyurethane polyester Prepolymer
Prepolymers are vacuum degassed at 80-85°C, then mixed thoroughly with pre-prepared MOCA, degassed again, poured, and cured. Suitable for both manual and mechanical molding.
TDI polyester based prepolymer Storage
The TDI polyester based prepolymer ,Polyester Prepolymer For Polyurethane Parts used should Store in a cool, dry place.
Once opened, use promptly; if not used all at once, seal with nitrogen and store in the original packaging for up to six months.
Polyester Based Polyurethane Prepolymer Packing
Polyester Prepolymer For Polyurethane Parts ,the Packaged in 20kg or 200kg galvanized iron drums.

|
Type |
BQ8314 |
BQ8331 |
BQ8315 |
BQ8316 |
BQ8317 |
BQ8318 |
|
NCO content % |
2.1±0.1 |
6.0±0.2 |
3.0±0.1 |
4.0±0.2 |
5.0±0.2 |
7.0±0.2 |
|
Appecrance at 20℃ |
white solid |
|||||
|
MOCA/g (100g prepolymer) |
6 |
17.5 |
8.6 |
11.7 |
14.5 |
20 |
|
Gel time/min |
9 |
2 |
12 |
8 |
6 |
4.5 |
|
Hardness(Shore A) |
72±2 |
96(52D) |
80±2 |
90±1 |
94±1 |
62D |
|
100% Modulus /MPa |
2.8 |
12.2 |
3.8 |
5.3 |
8.6 |
18 |
|
Tensile strength /MPa |
39 |
58 |
46 |
50 |
53 |
55 |
|
Bongation at break/% |
770 |
530 |
680 |
660 |
600 |
410 |
|
Tear Strength (without Nick)/(KN/m) |
56 |
132 |
70 |
84 |
112 |
152 |
|
Abrasion loss /mm² |
38 |
55 |
42 |
39 |
51 |
5 |
Our BEIQIAO can supply Polyurethane prepolymer - Polyester/TDI, PTMEG/TDI, Polyether/TDI, MDI systems etc,welcome to contact us.
Hot Tags: polyester prepolymer for polyurethane parts, China polyester prepolymer for polyurethane parts manufacturers, suppliers, factory, polyurethane prepolymer for indirect sales, high hardness PU, polyurethane prepolymer for oem applications, manual polyurethane resin, MDI polyrethane resin for pu board, Leak proof tires






