Application Of Polyurethane Prepolymer

Aug 14, 2023 Leave a message

Polyurethane prepolymers are widely used in polyurethane adhesives, coatings, elastomers, foam, fibers and many other fields.
Adhesive and coating prepolymer technology has been widely used in the preparation of single or dual component coatings or adhesives. Polyurethane adhesive not only has good adaptability to the surfaces of different adhesive substrates, but also has a high cohesive energy and considerable strength. Polyurethane prepolymers can serve as the main component of adhesives. According to the reactivity of prepolymers, they can be roughly divided into three categories: single component reactive adhesives, single component non reactive adhesives, and two component reactive adhesives. Single component reactive adhesives generally use prepolymers containing active NCO groups or enclosed NCO groups. Prepolymers containing free NCO groups can usually be directly used or formulated as room temperature cured single component moisture cured polyurethane adhesives or coatings. When preparing prepolymers for single component adhesives, whether in bulk or solution form, the molar ratio of NCO to OH groups is usually controlled to be greater than 1 in the chain extension reaction of polyester polyols with TDI or MDI, so that the free NCO content in the reaction product is controlled at a certain level. NCO based prepolymers can be used in many fields such as adhesives, coatings, impregnating agents, etc. Mixing polyurethane prepolymer with waste tire rubber particles to produce elastic pads for public places such as kindergartens is a typical example of the application of moisture cured polyurethane prepolymer as a rubber particle adhesive.