Beyond The Real Estate Downturn: Can Urban Renewal Become A New Support For Polyurethane?-3

Jun 24, 2026 Leave a message

If projects are mainly concentrated in roads, landscaping, parking spaces, rain-sewage separation, facade repairs and public-space upgrades, the pull on polyurethane demand will be relatively limited. But if more projects include roof insulation, external-wall energy saving, public-building efficiency improvements, heating pipeline renewal, cold-chain facilities and community commercial upgrades, then polyurethane rigid foam and PMDI demand could gain more tangible marginal support.

Of course, there are constraints.

On the one hand, funding sources for urban renewal projects are more complex, and local execution pace, project return balance and resident willingness can all affect implementation. On the other hand, polyurethane rigid foam still faces competition from rock wool, EPS and XPS in building insulation. Material selection is not based only on insulation performance; it is also affected by cost, fire-safety requirements, construction convenience, local standards and acceptance criteria. The plan also mentions strengthening the management of building insulation materials, which means that materials entering urban renewal projects will need not only performance advantages but also compliance with safety, flame-retardancy, durability and construction standards.

More importantly, the MDI market itself still faces supply pressure. PUdaily expects China's MDI consumption to grow at a CAGR of around 2.9% during 2026-2030 and reach about 4.30 million tonnes by 2030. This is a restrained outlook: demand should continue to grow, but the growth phase is shifting from high-speed to medium-low-speed; traditional downstream sectors remain weak, while emerging applications contribute incremental demand from a smaller base.

Urban renewal, therefore, is unlikely to push China's MDI market immediately into a strong cycle, nor should it be understood as a simple replacement for real estate demand. It is more like a new support point for construction-related polyurethane demand after the downturn in real estate new builds.

In the past, PMDI demand on the construction side was mainly tracked through new starts and completions. In the future, the industry will also need to watch how old buildings are renovated, how public buildings improve energy efficiency, how heating networks are renewed, and how cold-chain and community facilities address remaining gaps. For the industry, this is not the restart of a traditional real estate cycle, but the beginning of a shift in polyurethane demand structure from "incremental construction" to "stock renewal."