What Is The Differenence Between Polyester TPU And Polyether TPU 2?

Apr 10, 2025 Leave a message

Differences Between Polyether TPU and Polyester TPU

 

The soft segments of TPU can use various polyols, which can be broadly divided into polyether and polyester types.

Polyether Type (Ether) : High strength, good hydrolysis resistance, high resilience, and good low-temperature performance.

Polyester Type (Ester) : Better tensile properties, flexural properties, wear resistance, solvent resistance, and high-temperature resistance.

The differences in soft segments affect the properties as follows:

- Tensile strength: Polyester > Polyether

- Tear strength: Polyester > Polyether

- Wear resistance: Polyester > Polyether

- Chemical resistance: Polyester > Polyether

- Transparency: Polyester > Polyether

- Microbial resistance: Polyester < Polyether

- Moisture vapor transmission: Polyester < Polyether

- Low-temperature impact resistance: Polyester < Polyether

 

Production Raw Materials and Formulation Differences

1. Polyether TPU : The main raw materials for polyether TPU are 4,4'-methylene diphenyl diisocyanate (MDI), polytetramethylene ether glycol (PTMEG), and 1,4-butanediol (BDO). The proportions are approximately 40% MDI, 40% PTMEG, and 20% BDO.

2. Polyester TPU : The main raw materials for polyester TPU are 4,4'-methylene diphenyl diisocyanate (MDI), 1,4-butanediol (BDO), and adipic acid (AA). The proportions are approximately 40% MDI, 35% AA, and 25% BDO.

 

Molecular Weight Distribution and Its Impact

Polyether's molecular weight distribution follows the Poisson probability equation, resulting in a narrower distribution. In contrast, polyester diols follow the Flory probability distribution, leading to a wider molecular weight distribution.

The soft segment's molecular weight affects the mechanical properties of polyurethane. Generally, assuming the same polyurethane molecular weight, if the soft segment is polyester, the strength increases with the molecular weight of the polyester diol. However, if the soft segment is polyether, the strength decreases with increasing polyether diol molecular weight, although the elongation increases. This is because polyester soft segments have stronger polarity, and higher molecular weights increase structural regularity, which is beneficial for strength. Polyether soft segments have weaker polarity, and larger molecular weights reduce the relative content of hard segments, leading to lower strength.