Mold Does Not Appear On Polyurethane Foam, And Mice Do Not Chew On It?

May 20, 2024 Leave a message

Mold does not appear on polyurethane foam, and mice do not chew on it?

 

Let,s start with mold and other microflora. Colonies form where conditions are favorable. This is high humidity and certain temperature conditions. Therefore, if by chance the necessary "microclimate" has been created, then mold is likely to appear on the surface of the material (if we are talking about a closed cell structure) and even in its thickness (with open cells). For example, this might be a closed and poorly ventilated room.

 

At the same time, thanks to the high-quality insulation of closed-cell polyurethane foam, the possibility of conditions for microbial growth is not so high. When using a less thick layer of polyurethane foam, it is impossible to expect that insufficient insulation quality will lead to a constant accumulation of condensation, and the closed cells will not accumulate moisture from the air. But the likelihood of mold or mildew "nests" appearing is low and has nothing to do with any special anti-corrosion properties of the material - everything stems from its basic thermal properties. Well, polyurethane foam itself is certainly not a breeding ground for microbial communities.

·The next problem is that of rodents. It can be divided into two aspects.

 

Claims that polyurethane foam is a hindrance to them are completely unfounded. Yes, this polymer is definitely not digested by their digestive systems, but it is not any kind of poison. Of course, like this, rats won't chew polyurethane foam - it has no nutritional value to them. But if rodents need to enter a home or food storage facility from the street, a layer of polyurethane foam won't stop them.

The polyurethane foam layer won't act as a barrier for rodents, but they won't colonize it either

 

Another thing is that in closed cell polyurethane foam (as well as extruded polystyrene foam) mice or rats will never organize their nests. Rodents willingly settle in mineral wool or ordinary polystyrene foam - where it is easy to create the conditions necessary for life and reproduction. Any cavity in PUF or EPS is an airtight and moisture-tight chamber in which normal heat exchange and long-term residence are impossible.