What Are The Commonly Type To The Polyether Polyols?

Feb 24, 2024 Leave a message

What are the commonly type to the polyether polyols?

 

1. Polyoxypropylene Glycol (PPG):

Polyoxypropylene glycol, also known as PPG, is prepared in glass or stainless steel reaction vessels. The synthesis involves introducing a mixture of starting agents (1,2-propanediol or diethylene glycol) and a catalyst (potassium hydroxide) into the catalyst preparation vessel. The temperature is raised to 80-100℃, solvents in the catalyst are removed under vacuum, promoting the formation of alcoholates.

 

The catalyst is then transferred to the reaction vessel, heated to 90-120℃, and propylene oxide is added under controlled pressure (0.07-0.35MPa). Continuous polymerization of propylene oxide occurs until a specific molecular weight is achieved. After removing residual propylene oxide, the polyether mixture is neutralized, filtered, refined, and stabilized to obtain the final product.

 

2. Polytetrahydrofuran Glycol (PTHF):

Polytetrahydrofuran glycol, also known as PTHF or polyoxytetramethylene glycol (PIG, PTMEG, PTMG, PTMO), is synthesized through ring-opening polymerization of tetrahydrofuran in the presence of a cationic catalyst. In the production process, tetrahydrofuran is added to a reaction vessel, and with intense stirring at temperatures below -5℃, fuming sulfuric acid catalyst is added.

 

The reaction material is kept at low temperatures, water is added with stirring, and the temperature is raised to 70-90℃. Unreacted tetrahydrofuran is evaporated, and after settling, neutralization, filtration, and vacuum procedures, polytetrahydrofuran glycol is obtained. This high-cost polymer is often used in the production of high-performance polyurethane materials with excellent low-temperature, water, oil, wear, and mold resistance.

 

3. Tetrahydrofuranoxide Propylene Copolymer Glycol:

Tetrahydrofuranoxide propylene copolymer glycol is obtained through ring-opening copolymerization of tetrahydrofuran and propylene oxide catalyzed by Lewis acids. The process involves neutralization, water washing, dehydration, and filtration.

 

4. Special Polyether Polyols:

 

4.1 Reactive Polyether Polyols:

Introducing tertiary hydroxyl groups instead of secondary hydroxyl groups using either a primary alcohol or amine as the initiator has led to new varieties with features like low-temperature curing, reaction injection molding, self-skinning foams, and high resilience.

 

4.2 Flame Retardant Polyether Polyols:

Incorporating flame retardant molecules into the polymer chain ensures persistent flame retardancy. This can be achieved through reactions with flame retardant compounds such as trichloro phosphorus, antimony pentoxide, or various low-molecular-weight phosphoric esters, either alone or in combination.

 

4.3 Grafted Polyether Polyols:

Utilizing conventional or highly reactive polyether polyols as the base, or using unsaturated polyether polyols, and copolymerizing with vinyl monomers in a one-step or two-step reaction.

 

4.4 PolyTHF Polyols:

Used for producing high-performance polyurethane fibers, thermoplastic elastomers, synthetic leather, and other products.

 

4.5 Heterocyclic Modified Polyether Polyols:

Introducing aromatic or heterocyclic rings into the polymer system.