Polytetrahydrofuran (PTMEG)**, also known as **Polytetramethylene Ether Glycol**, is a homopolymer derived from the cationic ring-opening polymerization of tetrahydrofuran monomers, resulting in hydroxyl groups at both ends of the polymer chain.
CAS Number: 25190-06-1
MDL Number: MFCD00148879
Molecular Formula: H(OCH₂CH₂CH₂CH₂)nOH
Other Names: Polytetramethylene Ether Glycol, α-Hydro-ω-hydroxypoly(oxy-1,4-butanediyl), Poly(1,4-butanediol)
Properties of Polytetrahydrofuran (PTMEG)
Polytetrahydrofuran (PTMEG) is typically found as a white, waxy solid or a colorless, homogeneous liquid. It is insoluble in water and aliphatic hydrocarbons, but easily soluble in alcohols, esters, ketones, aromatic hydrocarbons, and chlorinated hydrocarbons. The solubility decreases with increasing molecular weight. At room temperature, PTMEG readily absorbs moisture from the air, though this property lessens as molecular weight increases. It is flammable at elevated temperatures.
Physical Properties:
Flash Point: 109°C
Melting Point: 28-40°C
Density: 0.972
Applications in Polyurethane
PTMEG is a key raw material for the production of polyurethane elastomers and spandex. PTMEG-based polyurethanes are known for their excellent low-temperature resistance, hydrolysis resistance, saltwater resistance, and mold resistance. However, PTMEG has a higher hydrophilicity due to its hydroxyl-terminated structure, making it prone to deliquescence. Additionally, the carbon atoms connected to the oxygen atoms in PTMEG are susceptible to oxidation, particularly under ultraviolet light exposure.
As the molecular weight of PTMEG increases, it transforms from a viscous liquid at room temperature into a waxy solid. Its physical properties are largely determined by its molecular weight, which typically ranges from 600 to 5000. For elastic materials and fibers, molecular weights between 1000 and 2000 are most common, with the most widely used PTMEG having molecular weights of 1000 and 2000. Low molecular weight PTMEG is a colorless liquid, while higher molecular weight PTMEG forms a white waxy solid.
Quality Standards:
Hydroxyl Value (mg KOH/g): 54.7-57.5
Molecular Weight: 1950-2050
Moisture: ≤ 0.015%
Acid Value (mg KOH/g): ≤ 0.05
Color Scale (Pt-Co Number): ≤ 35
Stabilizer: 0.05-0.07% BHT
Note: Molecular weight = 56.1 × 2 × 1000 / hydroxyl value
torage and Handling
PTMEG is hygroscopic and prone to oxidation. Antioxidants, such as BHT (Butylated Hydroxytoluene), should be added to prevent degradation. To maintain its quality, PTMEG should be stored in airtight containers, avoiding direct exposure to air.
Applications
PTMEG is primarily used as a soft segment in polyurethane products, contributing to their hydrolysis resistance, low-temperature performance, and dynamic properties. It is also a major raw material in the production of elastomers, synthetic leather resins, and elastic fibers (e.g., spandex).
