What's the application of the polyurethane for insulation?
1.Refrigeration equipment - such as refrigerators, freezers, cold storage, refrigerated trucks and other thermal insulation
2.Industrial equipment insulation - such as storage tanks, pipelines, etc.
3.Building engineering -- external wall and roof insulation
What's the Advantages of polyurethane insulation pipe products?
1.strong self-adhesive (do not need intermediate bonding materials),
solid bonding with the roof and external wall, with good wind resistance and negative wind pressure
2.the overall spraying construction can completely eliminate the "hot section" and "cold bridge"
3.flexible progressive technology can effectively prevent cracking of waterproof layer
4. mechanized operation, automatic batching, uniform quality, fast construction, short cycle
5.stable, long service life, will not pollute the surrounding environment
After leaving the open fire, it will be automatically extinguished, and it can only be carbonized during the combustion process without dripping. The size and shape of the carbonized layer are basically unchanged, which can effectively block air entry and prevent the spread of the fire, and has good fire performance.
How to solve the problems in the construction of polyurethane insulation pipe?
This phenomenon generally appears in the autumn and winter season or in the morning construction, because the temperature suddenly decreases or the temperature is low. It can be solved by increasing the ambient temperature and the black material temperature.
Generally, the black material temperature rises to 30-60℃., and the ambient temperature rises to 20-30℃. This phenomenon generally appears in spring and summer or noon construction, because the temperature suddenly rises because the temperature is too high. The black material can be cooled with cold water or placed outdoors at night to cool naturally to avoid direct sun exposure.
The foam strength of polyurethane insulation tube is small and foam is soft, which is caused by the imbalance of black and white material, and the proportion of black material can be appropriately increased (1:1-1.05). Be careful not to make the proportion of black material too large, otherwise, it will make foam brittle and affect the performance of foam.
