What Is The Rigid Foam For Wood Imitation?
Rigid foam for Wood Imitation is a type of high-density rigid polyurethane foam.
It features a fine cellular structure and a much higher density than conventional insulation polyurethane rigid foams, typically exceeding 200 kg/m³, although certain special faux wood materials can have densities lower than this value. Most polyurethane structural foams used for synthetic wood have a dense and tough surface, belonging to self-skinning rigid foams.
The dense surface gives this synthetic material not only the appearance and density range of wood but also higher strength, making it resistant to scratches. The core of the molded piece can be made with lower density to reduce weight while maintaining high overall strength, including high compressive strength, tensile strength, impact strength, and bending strength.
Lower-density Rigid foam for Wood Imitation materials possess the excellent thermal insulation properties of rigid polyurethane foam. For applications requiring high load-bearing capacity, to achieve higher strength, besides appropriately increasing the density, materials like fiberglass or natural fibers can be used to reinforce the faux wood, significantly improving the bending strength.
Rigid polyurethane foam has a closed-cell structure, low permeability, and low water absorption rates. Studies have shown that high-density rigid polyurethane foam (0.5 g/m³) with dimensions of 150mm*150mm*40mm has a volume water absorption rate and mass water absorption rate of 0.93% and 1.89%, respectively. In contrast, wood has a higher water absorption rate, and its strength decreases significantly after absorbing water.
What's the Materials for Rigid foam for Wood Imitation?
Rigid foam for Wood Imitation materials are made from a blend of polyurethane compounds through processes such as blending, stirring, foaming, molding, curing, and demolding to produce a medium to high-density rigid polyurethane foam (commonly referred to as rigid polyurethane foam).
Due to its wood-like characteristics and high rigidity and mechanical strength, it is often referred to as "synthetic wood" or "PU faux wood." Rigid foam for Wood Imitation materials typically use a two-component system, consisting of a polyether compound (white material) and a polyisocyanate compound (black material). The polyether compound (white material) is mainly composed of polyether polyol, combined with foaming agents, catalysts, stabilizers, and flame retardants.
