What Are The Differences Between High-resilience And Ordinary Sponge Materials?

Mar 06, 2025 Leave a message

The main differences between sponge foaming high-resilience products and ordinary sponge products in terms of materials are reflected in the selection of raw materials, proportions and the use of functional additives. The following is a specific comparison:
1. Differences in basic raw materials
High-resilience sponge (HR sponge)
Polyol: usually high molecular weight, high-activity polyether polyols (such as grafted polyols) are used, with longer molecular chains and higher cross-linking density, giving better elasticity and resistance to compression deformation.
Isocyanate (TDI/MDI): may be combined with modified isocyanates (such as TDI mixed with polymerized MDI) to enhance the stability of the molecular structure.
Foaming agent: mainly water (chemical foaming agent), CO₂ foaming is generated by the reaction of water and isocyanate, supplemented by a small amount of physical foaming agent (such as HCFC-141b or environmentally friendly substitutes) to form a more uniform open-cell structure.
Catalyst: Use delayed amine catalysts to accurately control the balance between foaming and gelling reactions to ensure that the bubbles are fine and evenly distributed.

Ordinary sponge
Polyol: Ordinary polyether polyol is mostly used, with low molecular weight and lower cost, but weaker elasticity and resilience.
Isocyanate: Usually single TDI or basic MDI is used, with low reactivity.
Blowing agent: May rely on **physical blowing agent** (such as Freon substitutes) or simple chemical foaming, with rough cell structure.
Catalyst: Conventional amine or tin catalyst, with fast reaction speed, but poor control over cell structure.

2. Difference in functional additives
High resilience sponge
Silicone oil (surfactant): A larger amount of highly active silicone oil is used to ensure thin cell walls and high open porosity (>90%), reduce the risk of collapse, and improve air permeability.
Reinforcement filler: Nano calcium carbonate or short fibers may be added to improve tear resistance and durability.
Flame retardant: Environmentally friendly flame retardants (such as halogen-free flame retardants) are often added to meet safety standards in furniture/automobile and other fields.
Antioxidants and anti-aging agents: Extend service life and prevent performance degradation due to ultraviolet rays or oxidation.

Ordinary sponge
Silicone oil: Ordinary silicone oil, with less usage, low open cell rate (may have more closed cells), which can easily lead to poor air permeability.
Filler: Add less functional filler to reduce costs.
Flame retardant: Cheap flame retardant (such as halogen-containing type) may be used or not added (depending on the purpose).

3. Comparison of physical properties
Density and resilience
High rebound sponge: high density (usually ≥40kg/m³), rebound rate >60% (quickly returns to its original shape after pressing).
Ordinary sponge: low density (20-30kg/m³), rebound rate <40%, prone to permanent deformation.

Support and comfort
High rebound sponge: disperses pressure through open-cell structure + high elastic molecular chain, suitable for long-term load-bearing (such as mattresses, seats).
Ordinary sponge: weak support, easy to collapse under long-term pressure, mostly used in low-load scenarios (such as packaging, low-end home furnishings).

4. Production process association
Although users pay attention to the difference in materials, the impact of the process on performance cannot be ignored:
High resilience sponge: mostly uses cold aging process (low temperature foaming) to reduce energy consumption and maintain the integrity of the molecular structure.
Ordinary sponge: commonly uses hot foaming process, which is low cost but may sacrifice the uniformity of the pores.

High resilience sponge achieves excellent resilience, durability and breathability through the optimized combination of high molecular weight polyols, modified isocyanates, high-efficiency catalysts, high-activity silicone oils and other materials, combined with functional additives. Ordinary sponges are mainly based on basic raw materials, pursue low cost, and have relatively single performance. When choosing, it is necessary to weigh performance and cost according to the application scenario (such as high-end furniture, car seats vs. packaging filling).

Our company has been supplying various high-quality sponge raw materials for a long time, and welcomes customers to consult and purchase.