What Are The Properties Of TPU?

Sep 04, 2024 Leave a message

TPUs allow industries to mainly benefit from the following combination of properties :
 

Abrasion/Scratch Resistance

 

High abrasion and scratch resistance ensure durability and aesthetic value


TPU is the material of choice in applications where abrasion resistance is critical. These include automotive interior parts, sports and leisure, technical parts, and specialty cables. It shows excellent results when compared to other thermoplastic materials.

The abrasion resistance of materials is usually determined by measuring the weight loss of a specimen in a standardized wear test. This is shown in the chart below:
 

TPU abrasion resistance in comparison to other materials


Comparative results of such a test as depicted in the figure above. This clearly shows the superior abrasion resistance of TPU when compared to other materials, such as PVC and rubbers.
 

Soft Touch/High Comfort of Use for Ergonomic Applications


Recent developments have made it possible to produce plasticizer-free TPU. These solutions have a hardness range of 55 to 80 Shore A, and offer:
 

high-quality surface finish,

excellent adhesion to engineering plastics such as ABS and Nylon,

unequal scratch and abrasion resistance.


 

UV Resistance


Aliphatic TPUs ensure color fastness to your aesthetic parts. They show superior stability to ultraviolet radiation and thus superior color stability. Along with these features they also maintain good mechanical properties.

Aliphatic TPU has exactly the right property profile and versatility to make it the material of choice for electronic applications. For both light & dark color parts, OEMs can rely on TPU's high scratch resistance & UV performance. View TPU Grades for Electronic Components »

 

Highly Breathable TPU Ensures Optimum Comfort


Highly Breathable TPU Ensures Optimum Comfort

Comfort is the utmost priority when you design sportswear or building and construction products. Highly breathable TPUs are available to ensure optimum comfort.

Traditional TPU has a vapor transmission below 1,500 g/m2/day. While highly breathable grades have values as high as 10,000 g/m2/day (+560%). Traditional TPUs can be blended with breathable ones. This fine-tunes the breathability according to your application requirements.

 

Combination of High Transparency with Abrasion Resistance


Crystal-clear TPUs are available with very good hardness. This characteristic allows the use of TPU in the:
 

extrusion of transparent films & tubes and hoses, or

injection molding of technical, aesthetic parts, where transparency at a thickness as high as 6mm can be achieved.


 

Other Benefits of TPU

 

High elasticity across the entire hardness range

Excellent low-temperature and impact strength

Resilience to oils, greases, and numerous solvents

Good flexibility over a wide temperature range

Robust weather and high-energy radiation resistance


Thermoplastic polyurethanes are elastic and melt-processable. Aromatic TPUs are strong, general-purpose resins that resist attack by microbes. They stand up well to chemicals. A drawback is that they degrade by free radical pathways induced by exposure to heat or UV. This degradation leads to product discoloration and loss of physical properties.

Aliphatic TPUs, on the other hand, are inherently light-stable. They resist discoloration from UV exposure. They are also optically clear. This makes them suitable laminates for encapsulating glass and security glazing.