What Is The Different Between TDI, MDI And NDI

Feb 13, 2024 Leave a message

TDI, MDI and NDI are three important polyurethane materials,and they have obvious differences in chemical structure, performance and use.Bellow article is an introduction to these three materials including comparison of advantages and disadvantages, performance differences and cost analysis.

 

TDI (toluene diisocyanate) is a commonly used polyurethane raw material, mainly used in soft foams, elastomers, coatings and other fields.The chemical structure of TDI makes it highly reactive and can react with polyols to form polyurethane.However,TDI has some disadvantages in the production and use process,such as easy yellowing,release of toxic gases,and easy decomposition at high temperatures.

Performance differences: Polyurethane made of TDI has good elasticity and softness, and is suitable for making soft foams, elastomers and other products.Due to its high reactivity, TDI is slightly insufficient for the production of high-strength and high-hardness polyurethane products.

Cost: The price of TDI raw materials is relatively low, so the cost of using TDI to make polyurethane is relatively low.

 

Compared with TDI, MDI (diphenylmethane diisocyanate) has higher reactivity and better heat resistance.Polyurethane made of MDI has high strength, hardness and wear resistance, and is suitable for making hard foams, elastomers, adhesives and other products.However, MDI also has some disadvantages in the production and use process, such as easy crystallization and release of toxic gases.

 

Performance differences: Polyurethane made of MDI has high strength, hardness and wear resistance, and is suitable for making hard foams, elastomers and other products.Compared with TDI, polyurethane made of MDI has better heat resistance and higher reactivity.

Cost: The price of MDI raw materials is relatively high, so the cost of using MDI to make polyurethane is relatively high.

 

NDI (naphthalene diisocyanate) is a new type of polyurethane raw material with high reactivity and excellent heat resistance.Polyurethane made of NDI has excellent strength, hardness and wear resistance, and is suitable for making high-performance polyurethane products, such as engineering plastics and special elastomers.However, NDI also has some disadvantages in the production and use process, such as high production costs and easy crystallization.

 

Performance differences: Polyurethane made of NDI has excellent strength, hardness and wear resistance, and is suitable for making high-performance polyurethane products, such as engineering plastics and special elastomers.Compared with TDI and MDI, polyurethane made of NDI has higher heat resistance and better dimensional stability.

 

Cost: The price of NDI raw materials is relatively high, so the cost of using NDI to make polyurethane is also relatively high.However, with the continuous progress of production technology and the gradual realization of industrial production, the cost of NDI is expected to gradually decrease.

 

In summary, there are obvious differences in the chemical structure, properties and uses of the three polyurethane raw materials TDI, MDI and NDI.Among them, TDI has good elasticity and softness, suitable for the production of soft foams, elastomers and other products; MDI has high strength, hardness and wear resistance, suitable for the production of hard foams, elastomers and other products; NDI has excellent strength, hardness and wear resistance, suitable for the production of high-performance polyurethane products, such as engineering plastics, special elastomers, etc.When choosing polyurethane raw materials, comprehensive considerations should be made according to the performance requirements and cost factors of the product.