What Is The Reason Why Polyurethane Foam Is Easy To Shrink? Why Is The Foaming Abnormal?

Sep 01, 2024 Leave a message

There are several reasons why polyurethane foam is easy to shrink:

 

1. There are too many materials in group A, which reduces the strength of the adhesive and causes a large shrinkage.

2. The materials in the spray gun are not evenly mixed, resulting in too small a spray or too high a viscosity.

3. The curing speed is too fast, causing most bubbles to appear in a closed-cell state.

4. Working at low temperatures directly causes the foam to shrink.

 

There are several reasons why polyurethane foam foam is not foaming properly:

 

1. The temperature of the material is too low, or the foaming agent and catalyst are not added.

2. The ratio of the two groups of materials is not scientific, resulting in the adhesive not foaming normally. Or there are problems with the quality of the adhesive and it cannot be used normally.

3. The ambient temperature is too high or too low, affecting the reaction speed and heat balance.

4. The thickness and strength of the shell are insufficient, and cannot effectively support the volume change of the foam.

 

To solve these problems, it is necessary to adjust the formula, process, equipment and environment according to the actual situation to achieve the best foaming effect.