What Is The Rigid Foam For Wall Insulation?

Jun 04, 2024 Leave a message

what is the rigid foam for wall insulation?When used the rigid foam for insultation,what are the classification methods of exterior wall insulation?

 

According to the different locations of the insulation materials, the main types of exterior wall insulation are external insulation, internal insulation and sandwich insulation.

 

Among them, internal insulation of exterior walls and external insulation of exterior walls are the two most commonly used methods.

 

1. External wall insulation is a construction method that places the insulation system on the outside of the exterior wall to achieve insulation of the building. Usually, a layer of insulation material is fixed on the outside of the base wall using adhesive materials, and the outside of the insulation material is reinforced with glass fiber mesh or galvanized steel wire mesh and coated with adhesive mortar. The outermost layer is the finishing layer.

 

2. Internal insulation of exterior walls is a construction method that places the insulation system on the inside of the exterior wall to achieve insulation of the building. Usually, prefabricated insulation materials are used on the inner surface of the exterior wall to paste, splice, plaster or directly make an insulation mortar layer to achieve the purpose of insulation.

 

 

The following are the matters that need to be paid attention to when spraying polyurethane insulation on exterior walls:

 

1. The ambient temperature during spraying construction should be 10~40℃, the wind speed should not be greater than 5m/s (level 3 wind), the relative humidity should be less than 80%, and construction should not be carried out on rainy days. When the ambient temperature during construction is lower than 10℃, reliable technical measures should be taken to ensure the quality of spraying.

 

2. The distance between the spray gun head and the working surface should be adjusted according to the pressure of the spraying equipment and should not exceed 1.5m; the speed of the spray gun head should be uniform during spraying. During the operation, the next layer can only be sprayed after the surface of the previous layer of polyurethane rigid foam sprayed is not sticky.

 

3. The polyurethane rigid foam insulation layer after spraying should be fully matured for 48h~72h before the next process is carried out.

 

4. The surface flatness of the polyurethane rigid foam insulation layer after spraying is allowed to deviate by no more than 6mm.