There are many kinds of TPU,such as transparent TPU granules,High Hardness TPU Granules,Hot-melt Adhesive Film TPU Granules,Injection Grade Polyester Based TPU Granules and so on.
But what's the TPU Granules?
Thermoplastic polyurethane (TPU) pellets, also known as PU thermoplastics, are linear block copolymers composed of oligomer polyol soft segments and diisocyanate-chain extender hard segments.
TPU pellets contain -NH-COO- groups within their molecular structure. Many of their properties depend on the type of long-chain diols used. The hardness of TPU can be adjusted by varying the proportion of hard segments. The photo-aging resistance of TPU can be enhanced by adding light stabilizers, and it also depends on whether the isocyanate is aromatic or aliphatic.
What's the Differences Between Aliphatic and Aromatic Isocyanates?
Aromatic Isocyanates,are used in applications where UV light exposure and oxidation causing discoloration are not a concern. Polyurethane coatings made from aromatic polyisocyanates are easily oxidized and, therefore, degrade more quickly under direct sunlight.
Aliphatic Isocyanates, are mainly used to manufacture light-stable coatings. They are used in applications requiring UV or sunlight stability, such as automotive clear coats and many water-based formulations.
Aliphatic polyisocyanates impart excellent chemical resistance and good aging resistance to polyurethane coatings. Because they lack phenyl groups, aliphatic isocyanates ensure lasting adhesion under harsh conditions.
Compared to aliphatic derivatives, aromatic polyisocyanates result in coatings with poorer aging resistance (yellowing) and chemical resistance (especially alkaline resistance). Consequently, aromatic polyisocyanates are primarily used for indoor applications (such as floor coatings and tank linings) or primers. In the automotive industry, even primers are increasingly made with aliphatic components to prevent yellowing and interlayer peeling.
Typically, aromatic polyisocyanates are not primarily used in coatings. For instance, 80% of TDI (toluene diisocyanate) products are used to make flexible foams, while 65% of MDI (methylene diphenyl diisocyanate) products are used to make rigid foams.
