What Need Pay Attention To Injection Molding Polyurethane Products?

Nov 26, 2023 Leave a message

During the injection molding process of polyurethane products, some specific aspects should be paid attention to, so that unnecessary problems or troubles can be avoided. So, the answer to this question is yes.

 

Moreover, the specific aspect is to have appropriate injection pressure and holding pressure. In addition, there may be other aspects.

 

There are bonding lines on polyurethane products. Is this a good thing or a bad thing? Also, what are dark spots or burnt spots?

 

If there are bonding lines on polyurethane products, it will have adverse effects, because it will affect the appearance of the polyurethane products and the strength of the products.

The black spots or burnt spots refer to the black dots or black stripes on the product.

 

Why is it better to choose polyurethane with higher hardness?
This is because choosing polyurethane with higher hardness can avoid some problems and reduce the rejection rate of products. Polyurethane itself is relatively sticky to the mold, so it is prone to problems such as shrinkage or bubbles, and its stability is not very good. Therefore, the above measures are taken to solve these problems.