PPG TDI Casting PU

Application: PPG TDI Casting PU is used to make rods, caster wheel, rollers, sealing rings, sieve plates etc.
Good abrasion resistance, water resistance,germ proof, excellent mechanical properties, color can be regulated by adding pigment. Cured by MOCA or other curing agent.
Send Inquiry
Description

 

Product description

 

- Curing agent: MOCA
- Hot casting polyurethane prepolymer
- Good elasticity
- Good hydrolysis resistance
- Good mechanical property

 

PPG TDI Casting PU can be used on the following applications: Bushes, Castor Wheels, Couplings, Conveyor Rollers, Cutting Boards, Fork-lift Tyres, Gears, Grading Screens, Pneumatic and Oil Seals, Scrapers, Skate Wheels, Wire Guides.

 

The molding process is composed of pre-heating, degassing, mixing with a hardener, pouring into the mold, curing, demolding and post curing.

Product Specification

 

Item

Unit

Value

NCO content

%

5.5±0.2

Density (24ºC)

g/ cm3

1.12

Appearance at 20℃

colorless transparent liquid

Hardener

MOCA

Operation introduction

MOCA/100g prepolymer

g

16.2

Prepolymer/ MOCA mixing temperature

℃

80/120

Viscosity at 85℃

mPa.s

300

Gel time

min

8

Post cure time(100℃)

h

16

Physical Properties

Hardness

shore A

90±2

Tensile strength

MPa

30

100%Modulus

MPa

7

300%Modulus

MPa

11

Elongation at break

%

430

Tear strength (Right-angle)

KN/m

85

Tear strength (Trouser)

KN/m

20

Rebound

%

25

 

Safety

 

Use in a well ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeated or prolonged contact on the skin may cause an allergic reaction.Eye protection is extremely important. Always use approved safety glasses or goggles when handling this product.

If Contact Occurs:

Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. Seek medical attention if allergic reactions occur.

Eyes: Immediately flush with water for at least 15 minutes, contact a physician.

Ingestion: If swallowed, contact a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as directed by medical personnel. Never give anything by mouth to an unconscious person.

Warehouse

2

 

Customers finished products show

 

2019082610335251140

 

Hot Tags: PPG TDI Casting PU, China PPG TDI Casting PU manufacturers, suppliers, factory, polyurethane prepolymer for blow molding, Polyurethane Resin For Wheels, Polyurethane Prepolymer for Polyurethane wheels, polyurethane prepolymer for retail, polyurethane prepolymer for cold resistant applications, polyurethane prepolymer for domestic markets