What Are The Molding Methods Of Polyurethane Raw Materials?

Jan 10, 2024 Leave a message

What are the molding methods of polyurethane raw materials?

In order for the consumer to receive the finished plastic product, the material is given the properties required for a specific function. This is achieved through a variety of raw material processing methods, which are suitable for all types of plastics.

 

Extrusion method

Polyurethane has all the necessary qualities to be molded by pressing. To do this, the raw material is heated to a plastic state and fed to the extruder. After the polymer block passes through the shaping stage, it is cooled and hardened. Products can be in the form of sheets, rods, rolled into rolls or cut into blanks.

 

Casting method

Facilitates the manufacture of items or parts with complex geometries. The process is easily automated and can be produced in large quantities. If large products weighing several tons are produced by casting, the process takes place on a workbench. The frame that forms the shape is filled with a softened substance that later hardens.

To speed up the production process, automated production lines use mechanisms that convey plastic under pressure. Polyurethane is applied to the metal surface and a layer of insulating polymer is applied to the workpiece.

 

suppression method

Use sheet, rod or granular polyurethane as the blank. The material is fed into a press, which forces it into a mold. Workpieces can be machined cold or hot. The finished product has a strictly specified geometry. Under production conditions, the process is automated and quality control is carried out electronically.

 

Filling method

Natural casting is used to create decorative pieces. The polymer is poured into the prepared frame while heated or diluted to liquid level with reagents. When plastic hardens, it forever retains its given configuration and can only be changed by reshaping it. This method allows you to produce a range of identical products.

 

Waht about Polyurethane recycling?

Polyurethane is recyclable, but it should be remembered that the material loses some of its main properties, such as resistance to the atmosphere or aggressive influences from the environment. Under favorable conditions, the polymer does not break down for decades. Resistance to UV rays and ozone has caused waste plastics to become a long-standing environmental problem.

 

Recycling issues can be solved by:

-Burning. Hydrocarbon-containing materials burn easily, but environmentally harmful additives are released into the atmosphere;

-Grinding. Inexpensive materials used as additives in concrete or asphalt mixtures for construction;

-Remelt. The material can be reshaped and reused as new products. But the problem is that different types of plastics are recycled, which makes it difficult to obtain products with specific technical properties;

-Glycolysis. A chemical reaction that results in the cleavage of long molecular chains under the influence of a catalyst when heated. The resulting polymer is a short-molecule compound that can be used as a component in the production of paints and varnishes, as an additive in asphalt concrete mixtures;

-Chemical processing. Reagents are used to cleave molecular chains to obtain substances suitable for other uses.