What is rigid polyurethane foam?
Rigid polyurethane foam, also known as polyurethane rigid foam or PU rigid foam, has the following characteristics:
· ① Good insulation effect
· ② Light weight
· ③ High specific strength
· ④ Excellent chemical resistance
· ⑤ Good sound insulation
The most prominent feature of PU rigid foam is that its thermal insulation performance is better than that of natural thermal insulation materials (such as rock wool, etc.) and other synthetic thermal insulation materials (such as expanded polystyrene, etc.), and it has become an important type of synthetic resin insulation material. Among polyurethane products, the amount of polyurethane rigid foam is second only to polyurethane soft foam.
According to different use requirements, rigid foam products with different densities, hardness, heat resistance and flame retardancy can be made by changing the formula and adjusting the raw material specifications. This allows the density of rigid foam plastics to be adjusted over a wide range, from as low as 10kg/m3 to as high as about 1100kg/m3 of almost solid body.
Introduction to use Low-density polyurethane rigid foam is mainly used for thermal insulation. Most polyurethane rigid foams have a density of 28~50kg/m3. They are mainly used for thermal insulation, such as insulation filling materials for refrigerators and freezers, insulation of hot water, steam, heating crude oil and chemical pipelines, insulation of building roofs and walls, insulation of cold storage and refrigerated trucks, etc.
High-density polyurethane rigid foam and glass fiber reinforced rigid foam have high strength and can be used to make imitation wood products. Its characteristics are that the density is smaller than that of wood, the manufacturing process is simpler, and various imitation carved wood products, structural panels, vehicle and ship parts, imitation wood furniture, etc. can be molded.
Ultra-low density rigid foam is generally used as packaging materials, etc.
Polyurethane rigid foam does not deform significantly under a certain load, but may break when the load increases to a certain extent, and the deformation cannot be restored. And most rigid foam products are closed-cell foam structures, which are significantly different from soft foams.
